Hello,
we sadly require quite high FPS for our project. We are getting about 100 FPS on Low settings on the WCUSA map with one vehicle spawned and driving with AI. We are getting spikes on 6 CPU threads (it was on just 4 like five minutes ago). The RAM usage is about 20GiB out of 32GiB available. We are also getting 23% GPU usage with 7GiB out of 16GiB VRAM available. The computer specs are as following:
- Ryzen 9 7900
- 32GiB of DDR5 RAM@6000MT/s
- Radeon RX 7900 GRE
We are requiring as many frames per second as possible, as our software has to simulate object detection using a camera running at 240FPS, so we need to get as close as possible.
Thank you in advance
1 Like
Thank you for reaching out!
Given your performance goals, especially targeting 240 FPS, it’s worth noting that even on high-end systems (like those commonly used on the West Coast USA map), reaching that frame rate consistently can be challenging due to the map’s complexity and high resource usage.
Here are a few suggestions to help improve performance:
- Try running on Vulkan: Switching to the Vulkan renderer may improve performance.
- Use a simpler map: Consider switching to lighter maps such as Gridmap or Small Grid to reduce CPU and GPU load.
- Disable or simplify traffic: If you’ve enabled complex traffic settings, try reverting to simple traffic or disabling it entirely to conserve resources.
Hopefully it will work!